ASSEMBLY
STEP 1: AXLE & WHEELS
Attach wheel axle (#24) and wheel (#6) to the base (#1) using hex bolt M8x25 (#26), lock washer Ø8
(#27) and flat washer (#25).
Tighten the wheel axle (#24) using hex bolt M6x12 (#16) and hex nut M6 (#52).
Attach support leg assembly (#43) to the base (#1) using hex bolt M8x20 (#62), lock washer Ø8 (#27)
and flat washer Ø8 (#50).
Attention:
Lock the Wheel Axle (#24) in position by using a 10" Adjustable spanner when fixing the
hex bolt M8X25 (#26) to the wheel.
STEP 2: HANDLEBAR
Lock the handlebar (#8) and base (#1) using key ring (#23), pawl (#22) and spring (#21). Then fixed
with hex bolt M10x60 (#33), flat washer Ø10 (#54) and nylon lock nut M10 (#68).
Install the handlebar into the
top hole when maneuvering
the chipper shredder
Install the handlebar
into the bottom hole
when operating
