Page 6
•
Attach the collection bag to the lawnmower body by sliding the
holes on the front of the bag over the hooks at the front of the cut-
ting height roller.
•
Attach the hook at the end of the support chain to the middle bar of
the lower handle.
ADJUSTING THE BOTTOM (FIXED) BLADE
This operation needs to be done whilst carefully turning the
cylinder blade.
We recommend the use of gloves.
•
The fixed bottom blade must be set correctly in order for the lawn
-
mower to work efficiently.
Using the spanner supplied, slacken off the two top nuts on each
side of the side casing. Carefully tighten the two adjusting knobs by
turning them slowly in a clockwise direction.
•
When the cylinder blade just makes contact with the bottom blade,
turn the knobs slightly in an anti-clockwise direction until the cylin-
der blade turns without touching the bottom blade. Tighten up the
nuts on the side casing.
ADJUSTING THE CUTTING HEIGHT
•
Adjust the height of cut by loosening the two knobs on the side of
the cutting height roller and moving the roller up and down to the
required height.
•
Remember to adjust both sides of the roller equally otherwise the
lawnmower will not give an even cutting finish
.
MAINTENANCE
After each use remove all grass clippings that may have collected in
and around the wheels, roller and blades.
We recommend a regular application of oil or lubricant (i.e. WD-40).
This should be applied to all cutting surfaces, the cutting reel axle
shaft and wheels.
This will keep your lawnmower in tip-top condition.
