background image

Page 4

SAFETY INSTRUCTIONS AND PREPARATION

• 

Read and understand this owner’s manual before assembly and use.  Learn its application 

and limitations as well as the specific potential hazards. Retain these instructions for refer

-

ence.

• 

Retain all the packaging until you are sure that the product is operating correctly.

• 

Take care with the sharp cutting blades.  It is recommended that gloves are worn when unpacking, 

assembling, adjusting and maintaining the lawnmower.

• 

This lawnmower is for mowing lawns only and for domestic, not commercial use.

• 

Never allow children or people unfamiliar with these instructions to operate the mower.

• 

Inspect the area where the lawnmower is to be used and remove all stones, sticks, wires and other 

debris or foreign bodies.

• 

Never place your hands, fingers or feet near the cutting blade when the lawnmower wheels are 

moving.

• 

Do NOT operate the mower whilst barefoot or wearing sandals.

• 

Walk slowly during use – do NOT run.

• 

Do NOT use when the grass is wet enough to be slippery.

• 

Never intentionally strike or ram trees, fences etc as this can cause injury and/or damage to the 

lawnmower.

• 

Do NOT mow steep slopes and also be sure of your footing.

SYMBOLS ON THE LAWNMOWER

Danger !

 Read the Instructions before use

Keep a safety distance of at least 6 metres from bystanders

Always wear gloves

Sharp rotating blades, keep your hands and fingers clear

       

Summary of Contents for THHM








Reviews: