DO NOT OVERREACH
Keep proper footing and balance at all times when using the machine. Never stand on the machine. Serious
injury could occur if the moving parts are unintentionally contacted. Do not store anything above or near the
machine where anyone might stand on the machine to reach them.
AVOID INJURY FROM UNEXPECTED ACCIDENT
Keep hands out of the way of all moving parts. Do not place any part of your body or any tool during
operation.
DO NOT FORCE TOOL
This chain saw is only designed for cutting of brushes, trunks or timber beams up to a diameter according the
guide bar length. It is only allowed to cut wood. Every other use of the machine is a not intended use.
Furthermore a professional use for tree services is strictly forbidden.
NEVER LEAVE MACHINE RUNNING UNATTENDED
Do not leave the machine unattended until it has come to a complete stop.
MAINTAIN YOUR MACHINE WITH CARE
Clean the machine immediately after use. Keep the machine clean to ensure it operates to its full and safest
performance. When maintaining this machine, only the
manufacturer’
s original replacement parts should be
used. The use of non-original manufacturer parts may invalidate your warranty.
PROTECT THE ENVIRONMENT
Take left over materials to an authorised collection point or follow the stipulations in the country where the
mixer is used. Do not discharge into drains, soil or water.
STORE IDLE EQUIPMENT
When not in use, the machine should be stored in a dry location. Keep the machine away from children and
others not qualified to use it.
ONLY USE APPROVED REPLACEMENT PARTS
Only use approved replacement parts. Unauthorised replacement parts can cause damage to the machine and
invalidate your warranty.
RESIDUAL RISK
Even with the intended use of the appliance there is always a residual risk, which cannot be prevented.
ELECTRICAL CONNECTION
Do not connect either core to the earth pin
The insulation on the grounded three metre electrical cord will only remain effective if the original insulating
parts are used for repairs and the spaces between the original insulation are maintained.
The use of a Residual Current Device
(“RCD”), on 230V electrics is recommended. If using an
extension cable,
plug it directly into the RCD.
