STORAGE & TRANSPORT
STORAGE
WARNING
Make sure that unauthorised persons do not have access to the device!
–
Allow the device to cool completely, before storing.
–
Store the machine in a dry place.
–
Store away from direct sunlight.
–
Do not store anything above or near the machine, where anyone might stand on the machine to
reach them.
–
Keep the machine away from children and others not qualified to use it.
TRANSPORT
–
Secure the device against slipping.
–
When shipping, use the original packaging if possible.
TROUBLE SHOOTING
DANGER
Improper repairs can cause your device to stop functioning safely. You therefore endanger
yourself, bystanders and your environment. You also risk invalidating your manufacturer’s
warranty.
PROBLEM
PROBABLE CAUSE
REMEDY SUGGESTED
Motor not running.
No Mains Voltage?
Check cable, plug, socket and fuse.
Cable Faulty?
Contact your local Approved Service
Dealer or Electrical Specialist if out of
Warranty.
Motor Protection Activated?
Remove all chipped debris & press
reset button
Safety Trigger not triggered?
Check the hopper motor housing
connection
Locking Lever is bottom
position?
Ensure Locking Lever on collector is
positioned in upper most position.
Material is not being
pulled into machine.
Material blockage?
Remove all chipped debris from blades.
(SAFETY GLOVES MUST BE WORN)
Are the blades
jammed/blocked?
Remove all chipped debris & press
reset button
Are the blades worn?
Replace the blades where necessary,
see blade removal instructions.
