EMPTY THE COLLECTOR
WARNING
Press the Off Button [O] and separate the device from the main power supply before removing or
inserting the collector.
Note: The Locking Lever has the function of a safety switch and must be in its top position while
operating the product.
If the Locking Lever is correctly located, but the machine is not operating, this & the switch must be
cleaned, if required.
–
Move Locking Lever (7) to bottom position.
–
Pull the collection container (8) completely out of the
frame.
–
Empty the container (8).
–
Slide the collection container (8) onto the frame as far as
it will go.
–
Move Locking Lever (7) to top position, when
NOTES ABOUT CHIPPING
–
Organic garden waste can be chipped as biological fertiliser for the garden. Feed material which
breaks down naturally such as leaves, small branches, and grass in appropriate quantities into
the hopper (1) so that it does not get blocked.
–
Alternate chipping branches and garden waste, that has been stored for a few days & is
therefore withered and damp. This prevents blocking of the motor cylinder.
–
Do not put soft waste such as kitchen waste into the chipper; compost it instead.
–
Large branches with leaves must first be chipped completely before any other material is fed in.
–
If you cut heavy material or branches without interruption, this may block the chipper. Pull out
the material by hand a little, to counteract this problem (DO NOT REACH INTO THE HOPPER).
–
Stones, nails or similar objects can cause major damage to the chipper. (CHECK CAREFULLY)
–
If the chipper begins to vibrate strongly, the blades are damaged or worn out. Replace the
blades if necessary (see later pages in this manual for details).
ATTACH THE HOPPER
The detachable hopper can be fitted and removed from the top of the shredder to help the user
feed material into the shredder.
–
Place the hopper on top of the shredder.
–
Loosen the green side clasps on the hopper.
–
Ensure the metal link is positioned under
the hook of the shredder.
–
Pull the green side clasps of the hopper
upwards to lock into place.
–
To remove, follow the above steps in
reverse.
7
8
