ASSEMBLY
Remove the machine and contents from the carton. Be sure the carton is empty before discarding.
If you require any assistance with regards to the contents of the lawnmower contact us:
Tel: 01793 333212 - Mon
–
Fri 8.00am
–
5.30pm (excl. Bank Holidays)
Email: [email protected]
STEP 1
Insert the latch lock between the latch mount brackets and connect them using an M6x20 hex
bolt and a M6 lock nut. Tighten so that the latch lock can still pivot. Attach the extension spring to
the latch lock and the latch mount bracket as shown in figure 1.
Insert the Ø13x28 clevis pin through the holes in the latch mount brackets and secure with an Ø3
R-pin.
STEP 2
Attach the latch lock assembly to draw bar B using two M6x16 hex bolts and M6 lock nuts &
tighten securely.
Draw Bar B
