STEP 9
Insert four flat head bolts M6x16 down through the tray and the inner holes in the Latch Stand
Plate. Secure the bolts with four Ø6 big flat washers and M6 lock nuts. Do not fully tighten.
STEP 10
Slide the handle into the channels in the Latch Stand Plate. Push the handle in all the way against
the front of the tray depressing buttons in the bottom of the handle.
Place an Ø6 lock washer and a Ø6 flat washer onto each of the two ST6.3x13 flange screws. Insert
the screws into the small holes at each end of the handle.
