The Handy 193821002, Operator'S Manual & Parts List

Page: 15 / 25

OPERATION

Before operating the machine, please ensure you are fully aware of the below instructions,
failure to do so, could invalidate your manufacturer’s warranty.

Completely unwind any extension cable. Connect it to the mixer first, before plugging into the
power supply.

Always start the mixer before loading the drum.

Load the drum with drum rotating.

Do not throw material into the mixer, to avoid it sticking firmly to the back of the drum.
Trickle it in steadily over the ram.
DRUM TILTING

The spring-loaded tipping wheel with locking lugs provides an easy positive control of the drum
which can be locked in the mix, discharge and stored position.

The drum is locked in position by lugs on the self-locating tipping wheel, which engages into the
locking plate on the mixer frame. To tilt the drum, withdraw the tipping wheel to dis-engage the
locking lugs. This then allows the tipping wheel and drum to be turned in the same direction.

To retain the drum in position, aligning the lugs with the slots, release the tipping wheel a little,
while retaining the drum. Rotate the tipping wheel until the locking lugs engage into the locking
plate on the mixer frame.