P O R TA B L E
Lighting Ignition
MANUAL IGNITION
You can light the burner manually if
the electronic ignition fails. Wearing
a protective glove, hold a long kitchen
match or extended gas lighter alongside
the burner flame ports and turn on the
gas control to MAX. Sight the burner
to ensure that flames are appearing at
the flame ports..
LIGHTING INSTRUCTION
1. Turn all gas control knobs to OFF (O),
then open the tank valve slowly. Always
keep your face and body as far from the
BBQ as possible when lighting.
2.Open the lid before lighting.
3.Push and hold the ignitor button, and
at the same time push and turn the
control knob slowly to MAX position.
The electrode will spark to light the
burner. Sight the burner to ensure
that flames are appearing at the flame
ports. Turn the control knob to OFF
IMMEDIATELY if the burner does not
light within 5 seconds. Wait 5 minutes
for gas to disperse, then repeat the
lighting procedure.
4.Once the first burner is alight, the
second can be lit by tuning its control
knob to MAX.
IF THE BBQ WILL NOT LIGHT USING NORMAL OR
MANUAL LIGHTING, REFER TO THE TIPS SECTION IN
THE TROUBLESHOOTING MANUAL, OR CONTACT
YOUR DEALER.
18
