Page 4 of 9
Section 4: To Use
TO USE
FREEZING THE FREEZER BOTTLES (2)
1. Remove/Unscrew the cap
2. Fill with clean water to the fill line. Do not overfill.
3. Replace/Screw on the cap
4. Place in freezer until frozen solid (allowing at least
6
hours for water to
freeze)
Line drawing showing water going into the freezer bottle pointing to/calling out the fill
line
(Reference image from the CMF fill line is circled in orange oval)
FILLING THE WATER RESERVOIR
1. Remove the reservoir from the base unit
2. Remove/Unscrew the cap
3. Fill with clean water to the fill line
4. Replace/Screw on the cap
5. Place the reservoir into the base unit
NOTE: The unit will automatically dispense enough water needed for the set
warming time
Line drawing showing water going into the reservoir
Line drawing showing how to insert into the base unit
(Reference image from the CMF fill line is circled in orange oval)
