8
Crisp & Clear
™
Audio Monitor
Problem
Possible Cause
Solution
No power
Parent Units:
Unit is not turned on
Turn the unit on
Batteries are dead
Replace batteries or plug in adapter
(See “Monitor Setup" on page 6)
Child Unit:
Unit is not turned on
Press ON/OFF button
Adapter not plugged in
Plug in adapter
Adapter plugged into outlet
which is turned off
If outlet is controlled by a wall switch,
be sure switch is turned on
Hissing sound
Parent Unit is turned on,
but Child Unit is off
Leave Child Unit plugged in
and turned on at all times (or if you
turn it off, turn off Parent Unit also)
Static or Interference
Units set to different channels
Set both units to same channel
Appliances (fans, hair dryer,
or mixer for example) causing
interference
Try turning off any nearby appliances
or switching channels or moving the
monitors away from source of
interference
Cross talk from cordless
phone or some other nearby
transmitter
Try switching channels
Child Unit not receiving power
Make sure adapter is plugged in and
outlet is receiving power
Batteries are low
Replace batteries or plug in adapter
Troubleshooting
