7
English
Monitor Use
1. Slide the channel A/B switch on the Child Unit to either A or B. Turn the unit on by
pressing the ON/OFF button.
2. Turn the Parent Unit ON/OFF by rotating the volume switch.
3. Slide the channel selector switch on the Parent Units to the same channel as the
Child Unit (A or B). For the Monitor to work properly, both units must be set to the
same channel.
4. Turn the volume dial on the Parent Units counter clockwise to the desired loudness
level.
5. Keep a Parent Unit with you. For best reception keep all units as near upright as possible.
Range:
The range of the Monitor will vary with the surroundings. You may want to test its workable
range by walking through your house and yard and listening for the volume and clarity of
the sounds being transmitted.
Using belt clip:
Slide onto your belt or waistband. The belt clip can rotate away from the battery
compartment for easy access to batteries.
Changing channels:
Always keep both units set to the same channel (A or B). If you experience interference or
static with one channel, switch to the other on both units.
Positioning antennas:
If the Child Unit is wall mounted, antenna should be to the side.
Lights
Here’s how to interpret the lights on the Parent Units.
Power Indicator
Light is Green
Both units are ON and the Monitor is ready to transmit sound.
Light is Red
Batteries in Parent Unit are weak. Replace with three
“AA” batteries.
Not Lit
Unit is not receiving power
(See “Troubleshooting,” “No power”).
Three Quiet Sound Lights
No Lights Lit
No sound from Child Unit (baby is quiet).
Lights are Green
Quiet sounds (baby may be whimpering or talking).
One Loud Sound Light
Light is Red
Loud sounds (baby may be crying or talking loudly).
Connectivity
Light is Green
Units are connected and the Monitor is ready to transmit sound.
Replacing Batteries (Parent Units):
Remove old batteries and see “To operate with batteries” on page 6.
2
1
3
4
