TIPS for getting started
Assemble a 2' or 3'
Double - Sided Solution
view from back
containerstore.com | 800-733-3532
7
•
It’s best to have two people to assemble a 62" or 83"
tall solution.
•
Before you begin, make sure the levelers on each Foot are
screwed all the way into the Foot.
•
Please note that all double-sided solutions require Feet on
both sides of the solution.
•
If assembling on tile or wood, take care to protect the floor.
Insert Upright into Feet
–
The two holes on the side of the Upright should be at the bottom of
your finished solution.
–
Line up the Upright with the slot in the Foot.
(Figure A)
To secure,
you can tap the Upright and Foot together on the ground or use
the mallet. Make sure the Upright is all the way into the slot on
the Foot.
(Figure B)
–
Repeat this process with another Foot on the opposite side of the
Upright. Set aside.
(Figure C)
–
Repeat the above three steps with another Upright and two Feet.
Install Crossbraces
–
Insert one Crossbrace into the top hole on the side of the Upright;
insert the other Crossbrace into the bottom hole. The bent tips on the
unattached end of each Crossbrace should face the same direction.
(Figure D)
–
Position the second assembled Upright/Feet set so that it is
perpendicular to the first set.
(Figure E)
–
Attach the opposite ends of Crossbraces diagonally into the holes of
the second Upright.
(Figure E)
–
Pull the second Upright/Feet set back to the forward position (so that
the Feet on both sides of the solution are parallel). This will lock the
Crossbraces into place.
(Figure F)
STEP
1
Tools needed:
plastic mallet, ladder or step stool for 62
"
and
83
"
tall solutions
A
B
C
D
E
F
STEP
2
For an 18" Double - Sided Solution, follow the instructions
for a Single - Sided Solution, on page 5. When the Solution
is assembled, tilt the unit until you can line up the Uprights
with the slots in the Feet. Tap into place.
Continued on page 8
