TIP
containerstore.com | 800-733-3532
11
A
C
D
Closet Rods
Install the Closet Rod
Holders and Closet Rods
–
Insert the Closet Rod Holder into the slot in the bottom of the
Ventilated Shelf Bracket.
(Figure C)
–
Tap the End Caps into both ends of the Closet Rod.
–
Snap the Closet Rod into the Closet Rod Holder.
(Figure D)
Installing Closet Rods that
Share a Closet Rod Holder
–
First, install joined rods in the center of the Closet Rod Holder,
then place the outer ends in the Closet Rod Holder.
(Figure E)
–
Tap the End Caps only into the non-joined ends of each Closet Rod.
Adding End Caps to the joined ends creates a gap.
STEP
1
STEP
2
décor Fascia
•
Add Shelf Liners before installing Fascia.
•
Position ALL pieces of Fascia before installing clips.
–
Position the Fascia with the opening facing the Ventilated Shelf.
(Figure A)
The notch in the Fascia that hooks onto the front
support wires of the Ventilated Shelf should be at the top. Hook over
the top wire with a downward motion, and secure it to the front of
the Shelf.
–
Use the included clips to secure the Fascia to the Ventilated Shelf.
–
The top of the clip features a groove that accommodates one shelf
wire. Once it’s attached to the underside of a shelf wire, slide it all
the way to the front of the Shelf and into the opening of the Fascia
for a secure hold.
(Figure B)
–
Repeat with another clip at the opposite end of the Fascia. If you
are installing a 1-1/2'or 2' Fascia, add the third clip at the center of
the Fascia.
Install the Bracket Covers
–
Left and Right Bracket Covers are not interchangeable.
–
Place the outer edge of the Bracket Cover over the outer edge of
the Ventilated Shelf Bracket.
(Figure F)
–
Push down from the back to the front to snap the Bracket
Cover in place.
B
A
E
F
