A
B
Twin xl Instructions
When two side
-
by
-
side bases do not align
On the higher base of the two, use a wrench to turn both nuts counterclockwise to lower the angle
until the higher angle base matches the level of the lower angle base.
Using two remotes to
control side
-
by
-
side bases
You can synchronize two wireless remotes with two
side-by-side Twin XL bases to simultaneously control
both bases with both remotes. This is ideal if you are
using the two Twin XL bases as a single King base. To
achieve the synchronization, (1) synchronize (A) Master
Remote with the control boxes of both bases and (2)
sync (B) Clone Remote with (A) Master Remote. Follow
the steps below.
(1) Press and hold the HEAD UP and FOOT UP buttons
simultaneously on
(B) Clone Remote. The remote
flashlight will turn on for 10 seconds.
(2) While holding down the buttons on the (B) Clone
Remote,
press the HEAD DOWN and FOOT UP buttons
on (A) Master Remote.
(3)
The syncing process is successful when (B) Clone
Remote flashlight begins to flash. Now, either remote
will simultaneously control both bases.
To desynchronize (B) Clone Remote from (A)
Master Remote, simultaneously press the HEAD UP
and FOOT DOWN buttons on (B) Clone Remote. The
desynchronizing process is successful when (B) Clone
Remote flashlight stops flashing.
Using one remote to control side
-
by
-
side bases
The bed base is designed to allow two Twin XL bases to function together as a single King base. To use one
wireless remote to control two side-by-side Twin XL bases at the same time, synchronize the remote with the
control boxes of both bases. For syncing instructions, follow Step 10 of Setup and Installation.
HIGHER ANGLED BASE
5