AMC-400 Series Digital Transmitter with Smart Sensor 2
10
3.2 FRONT LID OVERVIEW
2
3
4
1
5
6
7
Enclosure
Display
Transmitter status
LED
Smart Sensor 2
status LED
Modbus Address
Sensor & Vent
Push button
Figure 3-1 Front Lid View
1. Enclosure:
Enclosure and Lid Assembly, PVC 4”x4” Wall mount with
mount points. Enclosure Lid attaches with four screws.
2. Digital Display:
Displays gas concentration & Status information, 3 Digit
User Interface for configuration
3. Transmitter Status LED:
Red/Green LED
Indicates status of Transmitter.
4. Smart Sensor 2 Status LED:
Red/Green LED
Indicates status of integral Smart Sensor 2.
5. MODBUS Address
This is a write on area matching the MODBUS device ID
(Address). The indication here may be factory set and can
be changed as needed.
6. Sensor & Vent
This vent allows target gas to flow into the sensor. The vent
is also used for gas calibration.
7. Pushbutton:
Momentary
On/Off
Pushbutton
User Interface for Configuration.
