The 37Company Fluido Compact, User And Technical Manual

Page: 46 / 52

User Manual / Technical Manual - Electromagnetic compatibility
46 of 49
10 Electromagnetic compatibility
10.1 Electromagnetic immunity
Guidance and manufacturer’s declaration - electromagnetic immunity
The device is intended to use in the electromagnetic environment specified below. The customer or
the user of the device should assure that it is used in such an environment.
Warning!
• Use of accessories, transducers and cables other than those specified or provided by
the manufacturer of this equipment could result in increased electromagnetic emissions
or decreased electromagnetic immunity of this equipment and result in improper
operation.
• Use of this equipment adjacent to or stacked with other equipment should be avoided
because it could result in improper operation. If such use is necessary, this equipment
and the other equipment should be observed to verify that they are operating normally.
The Emissions characteristics of this equipment make it suitable for use in industrial
areas and hospitals (CISPR 11 class A). If it is used in a residential environment (for which
CISPR 11 class B is normally required) this equipment might not offer adequate protection
to radio-frequency communication services. The user might need to take mitigation
measures, such as relocating or reorienting the equipment.
Immunity test IEC60601 test level
± 8 kV contact Electrostatic discharge (ESD)
EN-IEC 61000-4-2 (2009)
± 15 kV air
Electrical fast transient (EFT) / burst
EN-IEC 61000-4-4 (2012) ± 2 kV
± 1 kV L-N Surge
EN-IEC61000-4-5 (2014)
± 2 kV L-PE / N-PE
0% U
T
for 0.5 cycle
0% U
T
for 1 cycle
70% U
T
for 25/30 cycles
Voltage dips, short interruptions and voltage variations on
power supply input lines
EN-IEC 61000-4-11 (2004)
0% U
T
for 250/300 cycles
Power frequency (50/60 Hz) magnetic field IEC
EN-IEC 61000-4-8 (2010) 30 A/m