5
Assembly Cont.
4.
Place seat bottom cushion (13) on
roller plate secure with 4 screws
(M6*15) from under side of roller
plate. (Tip: you may find it easier
to lay the BODYROW™ on its side
while assembling the seat).
5.
Slide back rest (14) into seat back
rest bracket. (Note: ensure back
rest slides between bracket; do
not place on outside of bracket).
Insert 2 bolts (M8*15) and
tighten. (Tip: sliding seat to back
of BODYROW™ will make it easier
to tighten bolts).
6.
Attach cable (63) to cable bracket
located at the bottom of lower
sway tube (10B) with (M8*25)
carriage bolt.
