2-4
User Manual PN 84481 Rev 1
Figure 2-3 Thales SureLINK Handset Connected to TU /BDU
NOTE
A longer Ethernet cable (not provided) can be substituted for the
6-inch provided cable to extend the SureLINK Handset farther
away from the TU / BDU. This cable must be compliant with the
Ethernet standard.
Mounting the SureLINK Handset
If mounting is desired, pre-drill and screw the mounting clip into a hard surface using the
provided two screws. The button on the backside of the SureLINK Handset will securely fit into
the clip for Handset storage while not in use.
Weather Proofing the Cord
The connection at the end of coil cord can also be more weather resistant by crimping a new
male Ethernet connector on the cable once it is pushed through the provided weather resistant
casing. This is not necessary and is left to the user to implement if desired.
