Seite 4 / 8
3) Adjusting the VTA
The tonearm should always be parallel to the record-surface. The VTA (Vertical Tracking An-
gle) has an influence on the sound. It can be adjusted easily and precisely, even while playing.
1)
Please release the locking-screw and make sure the tonearm-unit moves up and
down freely.
2)
Use the VTA-Screw to adjust the vertical position of the tonearm. If the length of the
pre-
installed screw does not fit, change it for another length. It’s three VTA
-screws
delivered with the tonearm in total.
3)
Tighten the locking-screw again. Do not forget to do this, as it has an audible influ-
ence on the sound (dynamics).
Locking-screw (Hex 2,5)
VTA-screw (Hex 2,0)
