Seite 2 / 8
1) Content
Please open the packaging and take out the tool-box placed on top, containing:
1)
Positioning device to install the tonearm on your turntable.
2)
Screwdriver for the locking mechanism of the azimuth adjustment device.
3)
Hex key wrenches (0,9 / 1,3 / 2,0 / 2,5) for installation and adjustment.
4)
All screws needed for the installation incl. some spares.
Please prepare all the tools for the installation. Under the top layer of the packaging unit, you
will find the following content:
5)
Tonearm: Main tonearm unit incl. tonearm-lift and internal wiring. While handling
this unit, please take special care on the thin and very flexible internal wiring.
6)
Headshell: The SIMPLICITY II is delivered with a separate headshell for quick installa-
tion and changing of the cartridge. As an option, additional pieces can be delivered
for the pre-installation of further cartridges.
7)
Base-ring: this item is to be installed on the turntable and includes a clamping mech-
anism. Please take care the clamping-piece is kept inside the base-ring.
8)
Sight-unit: This unique and ingenious tool enables you to install the cartridge in an
absolute precise position.
9)
Counter-weights: The SIMPLICITY II is delivered with three different counter-weights
to balance a wide range of cartridges.
5) Tonearm
6) Headshell
8) Sight-unit
1) Positioning device
3) Hex key 0,9 / 1,3 / 2,0 / 2,5
2) Screwdriver 2,0
7) Base-ring
9) Counter-weights
