manualshive.com logo in svg

Thales ProtectToolkit 5.9.1, Installation And Configuration Manual

Share
Download
Thales ProtectToolkit 5.9.1 Installation And Configuration Manual Download Page 68

Chapter 4:   ProtectToolkit Software Installation

The

Select Cryptoki Provider

dialog appears.

2.

Select your desired operating mode and click

Next

to complete the operation.

Uninstalling ProtectToolkit

You can modify an existing ProtectToolkit client installation/configuration or upgrade a PTK component by
uninstalling and then reinstalling the PTK component.

To uninstall ProtectToolkit components from Windows

1.

Navigate to

Programs and Features

in the Windows Control Panel.

2.

Locate and select the PTK component that you would like to uninstall.

NOTE

If you are uninstalling ProtectToolkit-M:

>

Tamper the HSM to destroy key information stored on the HSM that is no longer required.
See

Tampering the HSM

in the "Administrative Tasks" section of the

ProtectToolkit-M

User Guide

for more information.

>

Uninstall the PCIe HSM access provider (if it is installed) before uninstalling the
ProtectToolkit-M software. Failure to do so may prevent the ProtectToolkit-M software
from uninstalling correctly.

3.

Select

Uninstall

.

Installing ProtectToolkit on Unix/Linux

Installation and uninstallation commands are different for each of the supported Unix platforms. To account for
these differences, the package should be installed using the Unix Installation Utility. Manual commands
specific to your operating system can be used, but this is not the recommended method. The Installation Utility
is more likely to result in a problem-free installation or uninstallation. The latest versions of the client software
and HSM firmware can be found on the Thales Technical Support Customer Portal. See

"Support Contacts" on

page 10

for more information.

The utility provides a simple menu-driven interface. In addition to installing and uninstalling the access provider
on Unix systems, it can also:

>

List already-installed packages

Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide

2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group

68

Summary of Contents for ProtectToolkit 5.9.1































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands