Chapter 2: ProtectServer External 2 Installation and Configuration
psesh:>
network iptables addrule drop host -ip
<IP_address>
psesh:>
network iptables addrule drop network -net
<IP_address>
-mask
<netmask>
c.
To see the current list of rules:
psesh:>
network iptables show
d.
To delete a rule, specify the rule's position on the list:
psesh:>
network iptables delrule -rulenum
<number>
A rule's number is based on its current list position, so executing
network iptables delrule -rulenum 1
multiple times will eventually delete the entire list.
e.
Save your iptables changes:
psesh:>
network iptables save
You must execute this command, or any changes will be lost on the next appliance reboot.
8.
After making any change to the network configuration, reboot the appliance:
psesh:>
sysconf appliance reboot
9.
View the new network settings:
psesh:>
network show
SSH Network Access
After you have completed the network configuration, you can access the ProtectServer External 2 over the
network using the SSH protocol. You need an SSH client such as puTTY (available for free from
).
Powering off the ProtectServer External 2
Use PSESH to power off the appliance before toggling the power switch.
To power off the ProtectServer External 2
1.
While logged in to PSESH as
admin
or
pseoperator
, issue the command:
psesh:>
sysconf appliance poweroff
Wait for the appliance to perform shutdown procedures. The fan and LEDs will remain operational.
2.
Toggle the power switch, located on the rear of the ProtectServer External 2, to the off position. The fan and
LEDs will turn off.
Updating the Appliance Software Image
Thales provides secure update packages on the Customer Support Portal that allow the appliance
administrator to update the appliance software image on your ProtectServer External 2 and take advantage of
new PSESH functionality. If you are updating the appliance software from version 5.6.0 or earlier, you must first
install the secure package update patch, also available from the Support Portal.
>
"Installing the Secure Update Package Patch" on the next page
Thales ProtectServer HSM 5.9.1 ProtectServer HSM and ProtectToolkit Installation and Configuration Guide
2021-11-02 08:51:40-04:00 Copyright 2009-2021 Thales Group
35
