STEP 1
Top-set Assembly
Check Before
Operating
1
3
Firmly insert the compression silicone plug
into the slot below the pulp spout.
3
Assemble the strainer into the rotation wiper
then place it in the juicing bowl assuring that
the red dot on the strainer is aligned with
the red dot on the juicing bowl .
Note: The Juicer may leak if not assembled properly.
Place the juice bowl on the motor base
with the arrow aligned with the arrow
on the juicer base.
4
Place the juicing screw in the strainer/juice-
bowl assembly. Make sure the axel is properly
inserted in the base by turning it alternating
clockwise and anti clockwise until it is locked
in the correct position.
HOW TO ASSEMBLE
Check Before
Operating
•
Wash the parts before first use.
•
Ensure that the compression silicone plug and silicone ring are assembled properly.
1
2
4
HOW TO ASSEMBLE
7
