NBS®90 PolySort & SP IOM
P/N: 1193974
Revision Date: 4/25/2019
Page
21
of
83
NBS90 SP Transfer Locations
•
The leading edge of the first transfer module must be a minimum of 28" from the charge end of
the sorter.
•
The trailing edge of the last divert module must be at least 42" from the discharge end.
•
The center line of a transfer exit lane is centered on the center line of the transfer rollers in an
NBS SP.
•
Standard available coated transfer rollers widths are: 9", 12", 15", 18", & 21"
•
One NBS SP transfer can transfer to up to four separate lanes of 1/2 the width of the roller
length.
•
Single direction transfer to two lanes is called a "Dual Transfer"
•
Bi-directional transfer to two lanes each side is called a "Quad Transfer"
NBS SP Standard Drive Selections
•
Horse Power (HP)
o
5, .75, 1, 1.5 HP @ the following speeds
•
Feet Per Minute (FPM)
o
120, 150, 180, 200, 220, 250, 300 FPM
o
Additionally: 2 HP @ 200, 220, 250, 300 FPM
NBS SP Sorter Nominal Widths & Number Of Belts
•
11.5NBS-SP with 3 Belts on 2-1/2" Centers
•
14 NBS-SP with 4 Belts on 2-1/2" Centers
FEATURES:
BENEFITS:
High speed sortation of small product
Maximize throughput
Reversible diverter drive
Divert right and left, saving space
High friction transfer rollers
Positive acceleration and maximum divert rate
Pick up product “on-the-fly”
Maximize sort rate
Product is conveyed on belts until sorted
Increased accuracy of control tracking
Compact design of divert module
Close center of divert points
Individual belt take-ups
Long belt life and reduced maintenance
