IOM CRUZcontrol® Generation2 for NBC
P/N: 1118211
Revision Date: 05/31/2019
Page
21
of
66
Slug Release
Definition
All zones that are connected in one continuous string release at the same time
regardless of zone status. All zones will continue to release until the release signal
is removed.
Configuration The logic assemblies can be in basic or progressive mode.
When releasing from the discharge end of the conveyor line all jumper terminals
should be on pins 1-2.
User Action
Apply a high (24Vdc/120Vac) release signal to TB2,1-2 if using isolated inputs, the
logic assemblies can be in basic or progressive mode.
Or
Apply a high (24Vdc) release signal to TB4, 3 if using non-isolated inputs, the logic
assemblies must be in progressive mode.
