©Copyright Task Force Tips LLC 2022
10
LIE-200 April 27, 2022 Rev00
7.0 MAINTENANCE
No maintenance is required. Calibration is not required under normal circumstances. If needed, see section 5.5. If unit becomes
damaged and does not display correct data, obtain an RGA to send it back to the factory for service.
7.1 CHANGING THE BATTERY
CAUTION
Any alterations to the product or its markings could diminish safety and constitutes a misuse of
this product.
NOTICE
All replacement parts must be obtained from the manufacturer to assure proper performance and
operation of the device.
1. Remove (2) button head screws from the side of the
Gauge Cover.
2. Unscrew and remove the Gauge Cover.
3. Lift the SHO-GAUGE from the Body. Be careful not to
pull out or lose the O-ring at the bottom of this cavity.
4. Unscrew the Battery Cover.
5. Remove and replace the battery with the polarity as
marked on the battery holder.
Use battery type CR123A only.
6. Reassemble in reverse order ensuring the small O-
ring at the bottom of the gauge cavity stays in place.
