5.5 JOYSTICK MONITOR OPERATOR STATION
5.5.1 MOUNTING
This operator station allows the monitor to be controlled by a joystick. The installer will need to mount the joystick and connect the
cables to the communication interface box or to a primary operator station. The joystick needs to be mounted in a weatherproof
location. Example: Inside the cab of the truck.
Select proper weatherproof operating location. Joystick will require 4 ½” x 4 ½” (114 x 114mm) of panel space. A depth of 4”
(100mm) will be required behind the panel. Refer to Figure 5.5.1.1 for cutout dimensions.
After mounting the installer may rotate the joystick up to 22 degrees in either direction. To rotate joystick lift the rubber boot to
expose adjustable clamp. Loosen the clamping screws, rotate the joystick to desired position, and tighten clamping screws.
Fig 5.5.1.1
Joystick Operator Station
Cutout and Hole Dimensions
Fig 5.5.1.2
Joystick Instruction Label
2 27/32
2 27/32
2 27/32
2 27/32
1/4
1/4
3
3
22
HOLE MOUNTING DETAIL
HOLE MOUNTING DETAIL
Install joystick instruction label nearby for quick operation reference.
K
R
S
F
C
S
E
T
A
I
O
P
T
T
U
F
M
N
Q
F
I
E
H
IR
E
P
N
G
I
G
I
T
E
w
ww .tft.com
F G
O
I
STRA GHT
SMART SHAPER
1)
NOZZLE STOPS AT FULL FOG
2)
PRESS AGAIN FOR FLUSH
®
®
TASK FORCE TIPS
FIRE FIGHTING EQUIPMENT
STRAIGHT
STREAM
AUX
FUNCTION
TRIGGER
FOG THEN FLUSH*
800-348-2686 • www.tft.com
Y5336
19