B
E
F
A
G
D
C
Instruction Manual
Kat. Nr. 60.1505
Instruction Manual
Kat. Nr. 60.1505
• Press and hold the M.SET button until the desired time is indicated.
• Press the M.SET button briefly to advance one minute.
• If there is no button pressed until 8 seconds the second pointer will
move again.
• The manually set time will be overwritten by the MSF time when the
signal is received successfully again.
6.2 Setting of the alarm
• Turn the ALARM setting dial in direction of the arrow.
• The red alarm pointer will move. Set the desired alarm time.
• To activate the alarm function slide the ALARM ON/OFF switch upwards
to position ON.
• Once the alarm starts to ring you can stop the alarm by sliding the
ALARM ON/OFF switch downwards to position OFF.
• If the alarm is not stopped manually, the alarm will automatically turn
off after 2 minutes and will be reactivated at the same time.
• You can activate the snooze function by pressing the SNOOZE/LIGHT
button.
• The alarm will be interrupted for 5 minutes and the backlight will turn
on for 5 seconds.
6.3 Backlight
• Press the SNOOZE/LIGHT button. The backlight will turn on for 5 sec-
onds.
7. Care and maintenance
• Clean your instrument with a soft damp cloth. Do not use solvents or
scouring agents.
• Remove the battery if you do not use the product for a long period of
time.
• Keep the instrument in a dry place.
7.1 Battery replacement
• Change the battery when the functions of the instrument become
weak.
• Open the battery compartment and insert one new battery 1,5 V AA.
Ensure that the battery polarity is correct.
• Close the battery compartment again.
8. Troubleshooting
Problem
Solution
No pointer movement
➜
Ensure that the battery polarity is
correct
➜
Change the battery
No MSF reception
➜
Press and hold the REC button for 3 seconds
➜
Choose another place for the device
➜
Check if there is any source of interference.
➜
Wait for attempted reception during the
night
➜
Restart the instrument according to the
manual
➜
Set the clock manually
Incorrect display
➜
Press the RESET button with a pin
(A short beep will sound and the pointers
move to 12 o’clock)
➜
Change the battery
If your device fails to work despite these measures contact the supplier
from whom you purchased it.
9. Waste disposal
This product has been manufactured using high-grade materials and com-
ponents which can be recycled and reused.
Never dispose of empty batteries and rechargeable batteries
in household waste. As a consumer, you are legally required
to take them to your retail store or to an appropriate collec-
tion site depending on national or local regulations in order
to protect the environment.
The symbols for the heavy metals contained are:
Cd=cadmium, Hg=mercury, Pb=lead
This instrument is labelled in accordance with the EU Waste
Electrical and Electronic Equipment Directive (WEEE).
Please do not dispose of this instrument in household waste. The
user is obligated to take end-of-life devices to a designated col-
lection point for the disposal of electrical and electronic equip-
ment, in order to ensure environmentally-compatible disposal.
10. Specifications
Power consumption:
Battery 1.5 V AA (not included)
Housing dimension:
95 x 52 x 100 mm
Weight:
145 g (instrument only)
TFA Dostmann GmbH & Co.KG, Zum Ottersberg 12, D-97877 Wertheim.
No part of this manual may be reproduced without written consent of TFA Dostmann.
The technical data are correct at the time of going to print and may change without
prior notice.
DECLARATION OF CONFORMITY
Herewith we declare, that this wireless transmission device does comply with the
essentials requirements of R&TTE Directive 1999/5/EC.
A copy of the signed and dated Declaration of Conformity is available on request via
[email protected]. www.tfa-dostmann.de
08/13
RoHS
TFA_No. 60.1505_Anleitung_GB 13.08.2013 10:25 Uhr Seite 2