45
2.
Insert the batteries into the first transmitter.
3.
Within 30 seconds of powering up the first transmitter, insert the batteries into the
Temperature Station. Once the batteries are in place, all segments of the LCD will
light up briefly. Then the indoor temperature and the time as 0:00 will be displayed. If
they are not shown on the LCD after 60 seconds, remove the batteries and wait for at
least 60 seconds before reinserting them.
4.
The outdoor temperature readings from the first transmitter (Channel 1 and 2) should
then be displayed on the Temperature Station (if probe sensor has been installed
onto the first transmitter). If this does not happen after 2 minutes, the batteries will
need to be removed from both units and reset from step 1.
5.
Insert the batteries into the second transmitter as soon as the outdoor temperatures
from the first transmitter are displayed on the Temperature Station.
Note:
User must insert the batteries into the second transmitter within 30 seconds of
reception of the first transmitter.
6.
The outdoor temperature reading from the second transmitter will be shown on the
LCD and the Channel No. will shift back to "1", indicating that all three channels are
running successfully. If this does not happen after 2 minutes, the batteries will need to
be removed from all the units and reset from step 1.
Note:
After the Temperature Station has successfully received the second transmitter,
Channel 3 will display the data measured by the internal sensor of the second dual channel
