57
1.
After setting time reception ON/OFF, press the SET key, “12 h” or “24 h” flashes in
the LCD. (default 24 h)
2.
Press the + key or CH/- to select the “12 h” or “24 h” display mode.
3.
Press the SET again to confirm and to enter the
“Manual Time setting”
or exit the
setting mode by pressing the MIN/MAX key.
Note:
When 24 h mode display is selected, the calendar format will be "date and month"
display. When 12 h mode display is selected, the calendar format will be "month and
date" display.
MANUAL TIME SETTING
In case the Temperature Station is not able to detect the Atomic time (DCF) signal
(disturbances, transmitting distance, etc.), the time can be manually set. The clock will then
work as a normal Quartz clock.
To set the clock:
1.
The hour digits start flashing in the time display section.
2.
Use the + key or CH/- key to adjust the hours and then press SET key to go to the
minute setting.
Minutes (flashing)
Hours (flashing)
