Instruction
Manual
SSG
page
23
_________________________________________________________________________________________________________________
Attention
Do not approach the cutting head before the net control office, respectively
net provider, gives the OK.
In case of cutting into a live cable with this safety cutting unit the cut can be continued
and completed with this unit. In most cases the unit stays functioning.
Attention
In this case the operator must always contact the net provider.
After cutting a live cable the unit must be checked in respect of possible damages. If the
blades (Pos.-No. 12) are damaged they can be exchanged by the operator.
8.
Remove the cutting head from the cutting location by using the appropriate carrying
points (Cylinder body, handles)
9.
After use the safety cutting unit must be cleaned carefully. The insulated hose must be
treated with special care. It must be cleaned with a dry clean cloth and the coupling
(Pos.-No. 3) must be checked in respect of possible damages. Afterwards the unit must
be stored away in the appropriate aluminium case.
Notes on the use of the cutting head SSKG85, SSKG105
Attention
Do not open the cutting head unless the blades returned into their starting
position. Otherwise the cutting blades can be damaged.
Attention
Please check whether the cutting head is securely locked.
