manualshive.com logo in svg

Textron Keithley System SourceMeter 2601B-PULSE, Quick Start Manual

Share
Download
Textron Keithley System SourceMeter 2601B-PULSE Quick Start Manual Download Page 15

FAQs and next steps

FAQs

Where can I find updated drivers or firmware?

For the latest drivers and additional support information, see 

the Keithley Instruments support website.

To find drivers that are available for your instrument:

1. Go to 

tek.com/product-support

.

2. Enter 

2601B-PULSE

 and select 

GO

.

3. Select 

Software

.

What should I do if I see an error message when I turn 

the instrument on?

If an error message is displayed, press the 

EXIT (LOCAL)

 

key. The 2601B-PULSE will return to the default display 

screen. For detailed information about error messages, see 

“Errors and status messages” in the 

Model 2601B-PULSE 

Reference Manual

.

Next steps

For more information, refer to the Keithley Instruments 

website, 

tek.com/keithley

, for support and additional 

information about the instrument, including the 

Model 

2601B-PULSE Reference Manual

, which provides detailed 

information about all features of the instrument, including 

descriptions of TSP commands.

Summary of Contents for Keithley System SourceMeter 2601B-PULSE

















Reviews:

No comments

Brands by name

Popular brands

Load more brands