background image

EK6IDL Battery-powered Dieless Crimping Tool

Greenlee / A Textron Company

4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070

10

Maintenance

Wear eye protection when operating 

or servicing this tool. 
Failure to wear eye protection could 

result in serious eye injury from 

flying debris or hydraulic oil. 

Skin injection hazard:
Do not use hands to check for oil 

leaks. Oil under pressure easily 

punctures skin. If injured, seek 

medical attention immediately to 

remove oil.
Failure to observe this warning 

could result in serious injury, gan-

grene, or death.

Do not use solvents or flammable 

liquids to clean the tool body. 

Solvents or flammable liquids could 

ignite and cause serious injury or 

property damage.

Pinch points:
•  Remove battery before changing 

adapters or jaws.

•  Keep hands away from the crimp-

ing tool head when crimping.

Failure to observe these warnings 

could result in severe injury or death.

Relief valve adjustments must be done by an  

authorized service center.

Daily

Before use:

1.  Inspect the tool for wear or damage, such as cracks, 

gouges, or chips.

2.  Inspect the tool for damage or leaks.
3.  Inspect the rotation of the head assembly. Fully 

retract the ram. The head should rotate no more 

than 360°. If damage is detected, send the tool to a 

Greenlee  Authorized Service Center for inspection.

After use:

1.  Use a damp cloth and mild detergent to clean the 

housing. Allow the housing to dry.

2.  Fully retract the ram. Place the tool in the carrying 

case and store in a cool, dry place.

3.  If necessary, recharge the batteries. Refer to the 

instructions supplied with the battery charger.

Monthly

1.  Thoroughly clean all surfaces.
2.  Check the oil level.

Annually or After 10,000 Crimps

1.  Replace the hydraulic oil.
2.  Send the tool to a Greenlee  Authorized Service 

Center for inspection.

Checking the Oil Level

1.  Remove the screws holding the housing cover 

together.

2.  Point the crimping head downward and remove the 

oil reservoir plug. Fill reservoir if necessary.

3.  Replace the oil plug and housing cover.

Warranty Claims

Send tool to Greenlee CTSC Service Center.

Summary of Contents for GREENLINE GATOR EK6IDL













Reviews: