Textron GREENLINE 920XC Series, Training

Page: 29 / 79

End Threshold Configuration
• This threshold is the end threshold of
optical fiber. If the end threshold equals
3.0 dB, then the first event with insertion
loss
≥ 3 dB will be considered the end of
the optical fiber. If the value is set to 0
.dB, there will be no end threshold.
• Under the parameter configuration
menu use

and

to highlight “End
Thre.” Press Enter to enter a value. Press

to exit.
• Use

and

to adjust the position of
the highlighted area. Use

.and

to
change the digits. After setting, press
Enter to confirm.
• Note: The default setting is “03.00 dB.”
Setup – End Threshold