Setup – Avg. Time
Averaging Time
•Average time will affect the SNR directly. The
longer the average time is, the higher SNR is,
as well as dynamic range. Therefore, when
measuring long-distance optical fiber, a long
average time should be selected in order to
review events at the long-distance end.
• Under the parameter configuration menu use
.and
to highlight “Avg. Time.” Press Enter
.to .confirm (Figure 3-12). Press .to .exit.
• Use
.and
to highlight the desired time.
Press Enter to confirm.
• There are five levels of predefined average
time: 15 s, 30 s, 1 min, 2 min, and 3 min.
• The default setting is “30 s.”
Summary of Contents for GREENLINE 920XC Series
