441 Series Cable Feeding Sheaves
Greenlee / A Textron Company
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
2
Description
Greenlee 441 Series Cable Feeding Sheaves are
designed to make cable pulling setup easier.
Safety
Safety is essential in the use and maintenance of
Greenlee tools and equipment. This instruction manual
and any markings on the tool provide information for
avoiding hazards and unsafe practices related to the
use of this tool. Observe all of the safety information
provided.
KEEP THIS MANUAL
IMPORTANT SAFETY INFORMATION
SAFETY
ALERT
SYMBOL
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury or
property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for pre-
venting or avoiding the hazard.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
Hazards which, if not avoided, COULD result in
severe injury or death.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Read and understand all of the
instructions and safety informa-
tion in this manual before operating
or servicing this tool. This sheave
should only be operated by qualified
personnel.
Failure to observe this warning could
result in severe injury or death.
• Do not use with steel cable.
• Use in rated conduit size only.
• Never exceed cable manufacturer’s specifications
on pulling force and radius of bend on cable being
pulled.
• Do not exceed the rated pulling force at specified
angle of pull. Exceeding limits could damage cable
and feeding sheave.
• Never stand in direct line of pull. Sheaves can sud-
denly come out of the conduit and cause injury.
Failure to observe these warnings could result in
severe injury or death.
Note: Keep all decals clean and legible, and replace
when necessary.
Purpose of this Manual
This manual is intended to familiarize all personnel with
the safe operation and maintenance procedures for the
following Greenlee tool:
441 Series Cable Feeding Sheaves
Keep this manual available to all personnel.
Replacement manuals are available upon request at no
charge at www.geenlee.com.
All specifications are nominal and may change as design
improvements occur. Greenlee Textron Inc. shall not be liable for
damages resulting from misapplication or misuse of its products.
