Greenlee / A Textron Company
3
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
1990 Hydraulic Crimping Tool
IMPORTANT SAFETY INFORMATION
Inspect tool before use. Replace any worn or
damaged parts. A damaged or improperly
assembled tool can break and strike nearby
personnel.
Failure to observe this warning can result in
severe injury or death.
An incomplete crimp can cause a fire.
• Use proper connector and cable combinations.
Improper combinations can result in an incom-
plete crimp.
• The relief valve will sound to indicate a com-
pleted crimp. If you do not hear the sound of the
relief valve, the crimp is not complete.
Failure to observe these warnings can result in
severe injury or death.
Electric shock hazard:
This tool is not insulated. When
using this unit near energized
electrical lines, use proper personal
protective equipment.
Failure to observe this warning can
result in severe injury or death.
Wear eye protection when operating
or servicing this tool.
Failure to wear eye protection can
result in serious eye injury from
flying debris or hydraulic oil.
Skin injection hazard:
Oil under pressure easily punctures
skin causing serious injury, gan-
grene or death. If you are injured by
escaping oil, seek medical attention
immediately.
• Do not use hands to check for
leaks.
• Depressurize the hydraulic system
before servicing.
This symbol is used to call your attention to hazards
or unsafe practices which could result in an injury
or property damage. The signal word, defined below,
indicates the severity of the hazard. The message
after the signal word provides information for
preventing or avoiding the hazard.
Hazards or unsafe practices which, if not avoided,
MAY result in injury or property damage.
Hazards which, if not avoided, COULD result in
severe injury or death.
Immediate hazards which, if not avoided, WILL result
in severe injury or death.
SAFETY
ALERT
SYMBOL
Read and understand all of the
instructions and safety information
in this manual before operating or
servicing this tool.
