Textron Bell 206A Series, Maintenance Manual

Page: 76 / 234

BHT-206A/B-SERIES-MM-1
5-00-00
Page 46
Rev. 14 30 APR 2013 Export Classification C, ECCN EAR99
b. Examine under engine pan for fuel, oil, or water leaks.
c. Examine drain lines for condition and security.
d. Examine aft fuselage longerons for cracks, corrosion,
and condition. Pay particular attention to the upper left longeron
between aft fuselage frame at STA 179.92 and fuselage frame
at STA 206.76.
e. Examine interface between longerons and engine pan
structure for cracks, corrosion, distortion, and loose fasteners.
f. Inspect engine mount attachment structure for
condition.
CAUTION
ANY CRACK, CORROSION, OR LOOSE OR
SHEARED RIVET IS CAUSE FOR IMMEDIATE
GROUNDING OF THE HELICOPTER UNTIL THE
PROBLEM IS CORRECTED.
Chapter 53 and
Chapter 4 g. Examine the four tailboom attachment fittings on
fuselage aft bulkhead and tailboom forward bulkhead for cracks.
Give special attention to the tailboom attachment fittings/
intercostals and bolts, and to fasteners between the
intercostals. Particular attention must be given to inspection of
the upper left fitting.
CONTROLS
Chapter 27 1. Examine the anti-torque control system components for
condition and security.
Chapter 96 and
Chapter 97 ELECTRICAL AND AVIONICS
1. Examine antennas for condition and security.
2. Examine all components, electrical wiring, cables, and
connectors for chafing, general condition, and security.
PROGRESSIVE INSPECTIONS
5-19. 100-HOUR AIRFRAME PROGRESSIVE INSPECTION — EVENT NO. 4 (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER