Textron Bell 206A Series, Maintenance Manual

Page: 130 / 234

BHT-206A/B-SERIES-MM-1
5-00-00
Page 100
Rev. 14 30 APR 2013 Export Classification C, ECCN EAR99
Chapter 62 MAIN ROTOR SYSTEM
1. Remove main rotor blade leading edge erosion protection
tape, if installed.
2. Examine leading edge of blades for corrosion and erosion.
Restore contour as necessary.
3. If applicable, reinstall main rotor blade leading edge
erosion protection tape.
PYLON AREA
SWASHPLATE ASSEMBLY
Chapter 62 1. Verify and adjust swashplate tilt friction as required.
2. Value must be between 15 to 32 pounds (67 to 142 N). If
out of limits, adjust to 15 to 32 pounds (67 to 142 N) and check
again.
HYDRAULIC
Chapter 12,
Chapter 29,
Chapter 63 1. Remove hydraulic pump and rotor tachometer generator.
2. Examine hydraulic pump splines, transmission oil pump
splines, and rotor tachometer and adapter splines for condition
and security.
Chapter 12 3. Lubricate hydraulic pump driveshaft splines, oil pump
splines, and rotor tachometer splines.
POWER PLANT AREA
GENERAL
Rolls-Royce 250
Series Operation and
Maintenance Manual,
5W2 or 10W2 1. Perform engine inspection per the applicable Rolls-Royce
Operation and Maintenance Manual.
SCHEDULED INSPECTIONS
5-29. 300-HOUR INSPECTION (CONT)
DATA REFERENCE INSPECTION TASK DESCRIPTION
INITIAL
MECH OTHER