Textron 070544, Safety, Operation & Maintenance Manual/Parts List

Page: 30 / 134

en-30
5 CONTROLS AND DISPLAYS
SERVICE MENU
Please note some functions require a PIN to access.
5.2.Z.15 SERVICE MENU __________________________________________________
The button accepts the option that has the

.
The

is moved with the up and down to select, fault log, time until service,
diagnostics, I/O diagnostics and ECU (engine Control Unit) monitor.
5.2.Z.16 FAULT LOG _____________________________________________________
Select the fault log

and accept
5.2.Z.17 FAULT LOG _____________________________________________________
The last 50 “Faults” that the controller finds are recorded. When 50 faults are recorded,
the fault that next occurs will write over the oldest fault.
This information is got with the service tool or can be seen on the errors page of the
service menu. Press the button
to select, press the button up and down to
move the

. The errors will move with the last error at the top of the screen.
The fault / data log function has three actions. Each fault / data log function can contain a
maximum of 50 faults. the areas included are:
The Inclinometer, records slopes of more than 22°.
The Engine, records the engine shut downs because of overheat or loss of oil pressure.
The Service, records hydraulic by-pass fault and missed service.
S e r v i c e M e n u
F a u l t L o g
Ti m e U n t i l S e r v i c e
D i a g n o s t i c s
I / O D i a g n o s t i c s
J 1 9 3 9
S e r v i c e M e n u
F a u l t L o g
Ti m e U n t i l S e r v i c e
D i a g n o s t i c s
I / O D i a g n o s t i c s
J 1 9 3 9
F a u l t L o g
0 0 H o u r s
1 0 H o u r s
2 0 H o u r s
TST
™