B
34
Repair and Service Manual
FRONT SUSPENSION AND STEERING
Read all of SAFETY and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
699324
Figure 8 Hub Replacement
Adjust bearing. See the
Wheel Bearing Adjustment on
page 29
.
Replace the dust cap (1).
Lower vehicle per SAFETY section and tighten front
wheel(s) per WHEELS AND TIRES section.
Figure 9 Seal Installation
Wheel Bearing and Race Replacement
Tool List
Qty.
Non-Ferrous Punch .....................................................1
Ball Peen Hammer ......................................................1
Bearing Driver..............................................................1
Remove hub (1) from spindle (Ref. Figure 10). See the
Hub Replacement on page 33
.
Remove the grease seal (3), inner wheel bearing (4) and
bearing races (5) by tapping, through the other side of
hub, the bearing race using a hammer and a soft non-fer-
rous punch. Tap race in a circular pattern while moving
from side to side to avoid damaging bore of hub.
Clean outer wheel bearing (6), inner wheel bearing (4),
hub and dust cap (7) in solvent and dry thoroughly.
Inspect for signs of damage. Pitting or a blue coloration of
the rollers requires replacement of the bearing. If the
roller portion of the bearing is to be replaced, the race
must also be replaced.
To install race (5), make sure bore of hub (1) is clean and
place new race over bore of hub. Evenly tap with hammer
and bearing driver to drive race fully in bore. Repeat on
other side of hub.
Clean spindle (2) and pack new bearings with grease.
See the
Wheel Bearing Packing on page 28
.
Figure 10 Wheel Bearing Replacement
Install inner wheel bearing (4) and new grease seal in hub
and mount hub to spindle. See the
Hub Replacement on
page 33
Adjust bearing. See the
Wheel Bearing Adjust-
ment on page 29
.
Replace the dust cap (7).
Lower vehicle per SAFETY section and tighten front
wheel (s) per WHEELS AND TIRES section.
6
8
7
5
4
1
3
2
B
A - Install this side of seal
into housing
B - Lubricate lip of seal
A
1
2
3
4
5
6
7
1
4
7
2
3
6
5
Summary of Contents for TRACKER LX6 EFI
