TEXIO PAR-A Series, Instruction Manual

Page: 57 / 60

49
8-8. Command List
Setting of the IF-41GU, IF-41USB or IF-41RS + GP-620
No. Item Default value Command page
1 Unit to be controlled 0
（
Broadcast) PW 41
Inquiry to the IF-41GU/IF-41USB (Valid only when the IF-41GU/IF-41USB is used)
No. Item Send command Response command page
1 Inquiry about controlled units PW? PW 44
2 Equipment ID
＊
IDN?
＊
IDN
44,47
3 Connected slave units SLV? SLV 44,47
Send commands
No. Item Default value Send command page
1 Output voltage setting 0.00V VA, VE, VJ, VN 41
2 Output current setting 0.000A AA, AE, AJ, AN 41
3 OUTPUT OFF SW0/1 42
4 OUTPUT SELECT ON OA 42
5 PRESET PRESET1 PR0,
…
,PR3 42
6 Local Local LC1 43
7 Local lockout No lock-out LL1 43
8 Service request Disable SR0/1 43
9 Storing set data
－
MW1 44
Commands for which responses are made
No. Item Send command Response command page
1 Status request ST0 to 5 MS0 to 5 42,45,46
2 ID request PWID PWID 43,47
Information messages (Service request function)
No. Item Message page
1 Constant-voltage & Constant-current mode CC1 47
2 Alarm UU1 48
3 Storing the set data is complete MW1 48
※
The following commands have different functions from those of the PAR power supply unit.
Be careful.
ST1 The +/- flag and delay time, which have no effects in the PAR power supply unit, are
returned as the parameters. In the PAR-A power supply unit, this command is used
for voltage and current setting only.
ST2 The external control and OUTPUT PROTECT parameters are disused.
The OUTPUT SELECT parameter is added.
ST3 The number of characters of the parameter is changed from four into five, since the model
ID is changed from one character into two characters.