47
8-7-21. Sending power supply data (Response to the PWID command)
・
Response to the PWID command
PWID TEXIO,
＊
＊
, PAR18-6A, 0, 1.00/1.00
ROM version of the option board
PAR-A series power supply unit
ROM version No.
Always 0
Model name of specified PAR-A unit
System address
8-7-22. Sending address of controlled unit (IF-41GU/IF-41USB only)
・
Response to the PW? command
PW
＊
,
＊
,
＊
,
・・・
The system addresses of all slave units specified
as controlled units are displayed in order.
8-7-23. Sending addresses of all connected slave units (IF-41GU/IF-41USB only)
・
Response to the SLV? Command
SLV
＊
,
＊
,
＊
,
・・・
The system address of all slave units connected are displayed in order.
Only SLV is sent when no units are connected. System address 1 is
not returned since it is the address of the local bus master.
8-7-24.
Sending optional board ID (IF-41GU/IF-41USB only)
・
Response to the
＊
IDN? command
ROM version of the optional board
＊
IDN
TEXIO, IF-41GU, 0, 1.00
Always 0
Model of the optional board
8-7-25. Information of constant-voltage/constant-current mode
CC1,
＊＊
,
＊
000
・
Command is sent from slave unit to master unit when the service request function is enabled by
the SR1 command and the constant-voltage (CV) mode changes into the constant-current (CC)
mode or the constant-current mode changes into the constant-voltage mode.
CC1,
＊＊
,
Status of output(0: CV 1: CC)
＊
0 0 0
System address
