15
6. OPERATION PROCEDURES
6-1. Setting and Connection
1) Connecting the GP-IB bus cable
-Connect the GP-IB bus cable between the GP-IB connector
receptacle of the GP-600B and the controller.
NOTE: Never plug or unplug the connector while the GP-600B is
electrified. Disobedience to this instruction may result in
malfunctioning or troubles.
Fix the GP-IB bus cable to the GP-IB connector receptacle
of the GP-600B firmly with the screws.
2)
Setting the address, listen-only mode, and send delimiter
-Use the address switches (8-bit DIP switches) on the rear panel
of the GP-600B to set the address of the GP-600B on the GP-IB
bus, listen-only mode, and send delimiter.
