LMA4-V Laminator Instruction manual
Thank you for choosing a TEXET laminator. We aim to supply quality machines
that create excellent results. Before operating the laminator – please read and
keep the user instructions for reference.
When using electrical appliances, basic precautions should always be followed to
reduce risk of injury or electric shock, including the following:
1.
Always unplug the appliance when not in use.
2.
This appliance is not intended for use by persons, (including Children), with
reduced physical, sensory or mental capabilities or lack of experience or knowledge.
They should be given supervision and instruction in the use of the appliance, by a
person responsible for their safety.
3.
The laminator will become very hot in use and care should be taken when handling
the machine.
4.
Protect against the risk of electrical hazards. Do not immerse the power cord, plug
or appliance in water or other liquids, or use near water.
5.
Do not insert any metal objects or other foreign objects such as jewellery, hair,
fingers or clothing into the appliance.
6.
Remove paper clips and staples before laminating.
7.
Do not operate the appliance with a damaged plug or power cord or after the
appliance has malfunctioned or become damaged in some manner.
8.
If the Power Cord is damaged , it must be replaced by a qualified Engineer in order
to avoid a hazard,
9.
The appliance should be installed near the outlet socket and the socket should be
easily accessible.
10.
Only laminate paper or board. Do not laminate unusual objects.
11.
Do not use aerosol dusters or cleaners.
12.
Do not spray anything into or lubricate the appliance.
Setup:
1.
Operate the machine on a flat and stable surface.
2.
Ensure there is enough clear space at the rear of the machine for the laminated pouch to
exit the machine.
3.
The LMA4-V operates with laminating pouches 100 (2 x 50) micron – 160 (2 x 80) micron
thick, (Credit card size to A4 size)
Operating the laminator:
The LMA4-V is operated by a rocker switch, located at the right hand side of the appliance.
There are 2 positions
ON (l) and OFF (O)
1.
Plug the machines cable into a convenient 13 Amp domestic supply outlet.
2.
To Laminate select the ON (I) setting, laminating can begin when the Green “Ready”
light comes on, which indicates the Laminator is hot enough to laminate,
(Allow approx 3-5 minutes for the Laminator to warm up).
7
TTA4-V
Specifications/Technical Data
A4 PAPER TRIMMER
Cutting length
Cutting capacity
Cutting size
Net Weight
Product size
(
WxDxH)
310mm
Straight
cutting
blade
Perforated
cutting blade
Wavy
cutting blade
A4
/
A
5 /
A
6 /
A
7
0.25kg
390 x 60 x 120mm
5
sheets
(70
gsm)
3
sheets
(70
gsm)
3
sheets
(70
gsm)
Visit
www.texet.com
for
details
on
other
Texet
products
.
