Premier Elite
ComWiFi
Installation Manual
INS644
11
You now know the address range being used by the router. The Default Gateway is
the actual router itself.
So you can now decide how you want to configure the
ComWiFi
, either method is
valid, but they both require different steps.
Dynamic IP Address
(DHCP Reservation required)
With this method you will be assigned an address from the DHCP pool and will need
to reserve the address for the
ComWiFi
. On the WiFi enabled device where you
accessed the
ComWiFi
do the following.
•
Click on the
STA
tab on the left side of the screen.
•
Ensure Obtain an IP Address Automatically is
Enabled
.
•
Under the
'Network Name
' click on
Scan
and then select the WiFi network. This
is the name of the wireless router (SSID) that is connected to the internet.
•
Enter the router password if required.
•
Click
Save.
•
When prompted
Restart
the device, disconnect from the
ComWiFi
•
Once the device has restarted refresh the page or reconnect to the
ComWiFi
and open the
STA
page.
•
Take note of the IP address, subnet mask, Gateway & DNS Server for the
network. For Example
IP
= 192.168.0.100
Subnet mask
= 255.255.255.0,
Gateway
= 192.168.0.1 &
DNS
= 192.168.0.1
