Texas COMBI 800B User Manual Download Page 10

10 

 
 

GB - Original instructions 

Congratulations on purchasing your new Please read 
this instruction manual carefully, especially the safety 
warnings marked with the symbol: 

 

 

 

Table of contents 

 
Illustrations ................................................................... 2

 

Table of contents ........................................................ 10

 

Safety precautions ..................................................... 10

 

Miscellaneous............................................................. 11

 

Identification of parts .................................................. 11

 

Assembly .................................................................... 12

 

Assembly of accessory .............................................. 12

 

Operation .................................................................... 12

 

Operation safety zone ................................................ 13

 

Angle adjustment of accessory .................................. 13

 

Changing of handlebar height .................................... 13

 

Storage ....................................................................... 13

 

Troubleshooting ......................................................... 13

 

Technical specifications ............................................. 13

 

 

 

Spare parts

  

Spare part drawings for the specific product can be 

found  

on our website www.texas.dk

 

If you find the part numbers yourself, this will facilitate 

more rapid service. 

 

For purchase of spare parts, please contact your 

dealer. 

You will find a list of dealers on the Texas website. 

 

 

 
Safety precautions 

 

Setup 

 

Do not put hands or feet near or under rotating 
parts. 

 

Read this manual carefully. Make sure that 
you are familiar with the different controls, 
settings and handles of the equipment.  

 

Know how to stop the unit and ensure that you 
are familiar with emergency stop. 

 

Never allow children or people unfamiliar with 
these instructions to use the machine. Note, 
that local regulations can restrict the age of the 
operator. 

 

If you feel unwell, tired or have consumed 
alcohol or drugs, do not operate the machine. 

 

Always inspect the machine before usage. 
Ensure that no parts are worn or damaged. 

 

Replace worn out or damaged elements and 
bolts in sets to preserve balance. 

 

The operator of the machine is responsible for 
people’s safety.  

 

Never use the machine near children or 
animals. 

 

The operator of the machine is held liable for 
any accidents or hazards to other people and 
their property. 

 

Thoroughly inspect the area, where the 
equipment is to be used, if necessary remove 
any  foreign objects.  

 

Do not refuel gasoline indoors or while the 
engine is running. 

 

Spilled gasoline is extremely flammable, never 
refuel while the engine is still hot. 

 

Wipe off any spilled gasoline before starting 
the engine. It may cause a fire or explosion! 

 

Beware of hazards, while working on difficult 
soil hence; extremely stony or hard soil. 

 

Boots with non-slip soles with steel jacket is 
required. Avoid loose-fitting clothes. 

 

Operation 

 

Always start the engine from safety zone. 

 

Do not leave the safety zone while operating 
the machine, if it is necessary to leave the 
safety zone, turn off the engine before leaving 
the zone. 

 

After striking a foreign object, stop the engine 
immediately, remove the spark plug cap and 
inspect the machine thoroughly for damage. 
Repair the damage before continuing 

 

If the machine should start to vibrate 
abnormally, stop the engine and check 
immediately for the cause. Vibration is 
generally a warning of damage. 

 

Always disengage the levers, turn off the 
engine, and remove the spark plug, when the 
unit is left unattended. 

 

Always turn off the engine and ensure that all 
moving parts have come to a complete stop 
before making any repairs, adjustments, or 
inspections.  

 

Exercise extreme caution when operating on 
slopes.  

 

Never operate the machine at a fast pace.  

 

Do not overload machine capacity by 
attempting to work at too fast a rate. 

 

Do not carry passengers. 

 

Pay attention, while the machine is in reverse. 

 

Never allow any bystanders in front of unit. 

 

Always disengage the rotary brush, if not in 
use. 

 

Only operate the machine at daylight or in fully 
illuminated areas  

 

Ensure a stable foothold and always keep a 
firm hold on the handles. Always walk, never 
run. 

 

Do not operate the equiment when barefoot or 
wearing sandals. 

Summary of Contents for COMBI 800B

































Reviews: