Texas Instruments WiLink WL 1MOD Series Manual Download

Page: 3 / 52

Table of Contents

1 Features

............................................................................

2 Applications

.....................................................................

3 Description

.......................................................................

4 Functional Block Diagram

..............................................

5 Revision History

..............................................................

6 Device Comparison

.........................................................

7 Terminal Configuration and Functions

..........................

7.1 Pin Attributes...............................................................

8 Specifications

..................................................................

8.1 Absolute Maximum Ratings........................................

8.2 ESD Ratings...............................................................

8.4 External Digital Slow Clock Requirements................

8.5 Thermal Resistance Characteristics for MOC

100-Pin Package.........................................................

8.6 WLAN Performance: 2.4-GHz Receiver

Characteristics.............................................................

8.7 WLAN Performance: 2.4-GHz Transmitter Power....

8.8 WLAN Performance: Currents..................................

8.9 Bluetooth Performance: BR, EDR Receiver

Characteristics—In-Band Signals................................

8.10 Bluetooth Performance: Transmitter, BR ...............

8.11 Bluetooth Performance: Transmitter, EDR..............

8.12 Bluetooth Performance: Modulation, BR.................

8.13 Bluetooth Performance: Modulation, EDR..............

8.14 Bluetooth low energy Performance: Receiver

Characteristics – In-Band Signals...............................

8.15 Bluetooth low energy Performance: Transmitter

Characteristics.............................................................

8.16 Bluetooth low energy Performance: Modulation

Characteristics.............................................................

8.17 Bluetooth BR and EDR Dynamic Currents.............

8.18 Bluetooth low energy Currents................................

8.19 Timing and Switching Characteristics.....................

9 Detailed Description

......................................................

9.1 WLAN Features........................................................

9.2 Bluetooth Features....................................................

9.3 Bluetooth Low Energy Features................................

9.4 Device Certification...................................................

9.5 Module Markings.......................................................

9.6 Test Grades...............................................................

9.7 End Product Labeling................................................

9.8 Manual Information to the End User.........................

10 Applications, Implementation, and Layout

...............

10.1 Application Information...........................................

11 Device and Documentation Support

..........................

11.1 Device Support........................................................

11.2 Support Resources.................................................

11.3 Trademarks.............................................................

11.4 Electrostatic Discharge Caution..............................

11.5 Glossary..................................................................

12 Mechanical, Packaging, and Orderable

Information

....................................................................

12.1 TI Module Mechanical Outline................................

12.2 Tape and Reel Information......................................

12.3 Packaging Information............................................

5 Revision History

NOTE: Page numbers for previous revisions may differ from page numbers in the current version.

Changes from November 1, 2017 to April 26, 2021

Page

• Updated the numbering format for tables, figures and cross-references throughout the document...................

• Updated to "Bluetooth 5.1 Secure Connection..." in

Section 1

..........................................................................

• Updated

Section 6.1

Related Products

.............................................................................................................

• Updated "Bluetooth 4.2" to "Bluetooth 5.1" in

Section 9.2

...............................................................................

• Updated "Bluetooth 4.2" to "Bluetooth 5.1" in

Section 9.3

...............................................................................

• Deleted the sentence that began "Moreover, the module is also Wi-Fi certified..." in the first paragraph in

Section 9.4

Device Certification

......................................................................................................................

www.ti.com

WL1801MOD, WL1805MOD, WL1831MOD, WL1835MOD

SWRS152N – JUNE 2013 – REVISED APRIL 2021

Submit Document Feedback

Product Folder Links:

Summary of Contents for WiLink WL 1MOD Series





















































Search results

Summary of Contents for WiLink WL 1MOD Series

Reviews:

Related manuals for WiLink WL 1MOD Series

Brands by name

Popular brands

Texas Instruments WiLink WL 1MOD Series, Manual

Search results

Summary of Contents for WiLink WL 1MOD Series

Reviews:

Related manuals for WiLink WL 1MOD Series

Brands by name

Popular brands